Common labor protection products, you will care?

Labor protection products, if not properly maintained and maintained properly, then the use of the process, it is prone to accidents, or even damage, the role of labor protection.

The following types of common labor protection products, do you know how to maintain it? Come and find out.

01. Helmet

Always use a safety helmet should be kept neat. Do not touch the fire, do not paint any paint, not stool to sit, to prevent loss. If it is lost or damaged, it must be replaced or replaced immediately. No helmets are not allowed to enter the construction site.

02. seat belts

Seat belt parts are not free to disassemble. Belt to avoid contact with high temperature, open flame, acid and so on. Seat belt from the date of purchase within 2 years, should be randomly selected from the same batch of two, according to the relevant national standards for testing, if not qualified, you should stop using the batch products.

03. Air respirator

Air breathing apparatus and its components must be shielded from direct sunlight. Long-term sunlight will damage the parts, may cause can not be used again, but also cause rubber parts aging.

Air respirator must pay attention to be kept clean, storage, to ensure that the indoor temperature can not be lower than 5 ℃ or higher than 300 ℃, air respirator rubber parts, long-term storage when not in use, be sure to apply a dry surface Agent.

04. Eye protection supplies

To prevent the lens from being squashed, the lens should be placed face up during storage. Do not scratch the surface of the lens with a knife or other tools. Do not stack it with hard objects such as parts and tools. To prevent distortion of the glasses, do not place heavy objects on the glasses or over-squeeze the glasses.

05. Auditory organ protection products

If the earmuffs are worn or faulty, the sheath should be replaced. Repeated use of the earplugs, daily exhausted, it should be promptly cleaned, and then dried or air-dried. Disposable earplugs with dirty, it should be promptly replaced.

06. hand, foot protection supplies

Before use, should check the protective gloves, protective shoes are damaged, aging and so on. Protective gloves and protective footwear should be kept out of the way of damage or chemical contamination. Protective equipment shall not be exposed to the sun. Damaged, aging protective equipment should be promptly replaced.

07. Other labor protection supplies

Other protective articles should be regularly maintained and maintained in strict accordance with the relevant provisions and regular safety inspections should be carried out and replaced in time if any hidden problems are found.